List of Confirmed presentations

Evaluation and analysis of Compact Tension test on CFRP materials

R. Rutar (Institut Clément Ader, France) , C. Bouvet* (Institut Clément Ader, France) , J. Serra (Institut Clément Ader, France)

Mechanical Response of Composite Laminates Under Dynamic Load Conditions: Effect of Material Properties and Manufacturing Processing

M. Chairi* (University of Messina, Italy) , G. Di Bella (University of Messina, Italy) , F. Salmeri (University of Messina, Italy)

Temporal and Spatial Coupling Methods for the Efficient Modelling of Dynamic Solids

K. Chan* (University of Oxford, United Kingdom) , N. Bombace (AMD Inc., United Kingdom) , I. Sahu (University of Oxford, United Kingdom) , S. Falco (University of Oxford, United Kingdom) , N. Petrinic (University of Oxford, United Kingdom)

Multifunctional shape memory alloy tufted composite joints with enhanced structural performance and damage detection capabilities

W. Khor (Coventry University, United Kingdom) , F. Ciampa* (Politecnico di Bari, Italy) , M. Cinefra (Politecnico di Bari, Italy)

Experimental and numerical assessment of hybrid composite crash structures offering increased sustainability

D. Dalli* (FEUP, Portugal) , A. Arteiro (FEUP, Portugal)

On the crashworthiness in aerospace field: numerical and experimental capability of CIRA

F. Di Caprio* , M. Ignarra , F. Romano

Novel structural architectures to improve the damage tolerance of wing leading edge under bird strike condition

F. Di Caprio* , M. Belardo

Parametric stability analyses of composite reinforced structure

M. Filippi* (Politecnico di Torino, Italy) , R. Azzara (Politecnico di Torino, Italy) , E. Carrera (Politecnico di Torino, Italy)

Possible Solutions for the Application of Flax Fibre Reinforced Composites in the Automotive Sector: an Overview

V. Giammaria* (University of Camerino, Italy) , G. Del Bianco (University of Camerino, Italy) , M. Capretti (University of Camerino, Italy) , S. Boria (University of Camerino, Italy)

A Preliminary Experimental Evaluation of Energy Absorption Capabilities of BCC and W-BCC Lattice Structures Manufactured via 3D Printing

G. Iacolino* (Kore University of Enna, Italy) , G. Catalanotti (Kore University of Enna, Italy) , G. Mantegna (Kore University of Enna, Italy) , E. Gonzalez (AMADE, Polytechnic School, Universitat de Gir, Spain) , A. Alaimo (Kore University of Enna, Italy)

CFRPs as transmission problem in waveguides

R. Racke* (University of Konstanz, Germany)

Compressive strain-rate sensitivity of the off-axis stress/strain behaviour of a novel UD carbon fibre-reinforced thermoplastic for aeronautical applications

P. Silva Campos* (University of Porto, Portugal) , D. Dalli (INEGI, Portugal) , I. Rodrigues Lopes (INEGI, Portugal) , A. Arteiro (University of Porto, Portugal)

Experimental Study on the Influence of Defects from Automated Fibre Placement under Varying Strain Rates

S. Yoo* (German Aerospace Center e. V., Germany) , M. Vinot (German Aerospace Center e. V., Germany) , D. Deden (German Aerospace Center e. V., Germany) , R. Glück (German Aerospace Center e. V., Germany) , N. Toso (German Aerospace Center e. V., Germany) , H. Voggenreiter (German Aerospace Center e. V., Germany)

Modal analysis of a laminate panel with 10 mm notch focused on the effect of a functionally oriented fabric layup with 10 mm wide carbon strips

R. Zbončák* (VÚTS, a.s., Czechia)

A novel 3D constitutive model to predict the dynamic effects of fibre-reinforced polymer laminates

I. Cózar (Universitat de Girona, Spain) , P. Maimí (Universitat de Girona, Spain) , E. González (Universitat de Girona, Spain) , P. Camanho (Universidade do Porto, Portugal) , F. Otero (Universitat de Politècnica de Catalunya, Spain)

An Innovative Approach to Enhancing Wing Resistance to Bird Strikes through Advanced Structural Design based on Additive Manufacturing

V. Acanfora (University of Campania "Luigi Vanvitelli", Italy) , M. Battaglia (University of Campania "Luigi Vanvitelli", Italy) , A. Riccio (University of Campania "Luigi Vanvitelli", Italy)

An Investigation into the Combined Effect of Strain Rate and Temperature on the In-Plane Shear Response of IM7/8552

P. Hahn (Fraunhofer Institute for High Speed Dynamics, Germany) , M. Imbert (Fraunhofer Institute for High Speed Dynamics, Germany) , M. May (Fraunhofer Institute for High Speed Dynamics, Germany)

Assessment of advanced modeling strategies for FE analysis of impacts on CFRP aerospace structures

D. Fanteria (University of Pisa, Italy) , S. Sanvenero (SMARTCAE s.r.l., Italy)

Damage modelling of woven carbon fiber and epoxy matrix composite sandwiches under impact loadings

F. LACHAUD (ICA / ISAE-SUPAERO, France) , P. SIMARRO (ISAE-SUPAERO, France) , J. JEZEGOU (ISAE-SUPAERO, France) , M. RIGANTTI (ISAE-SUPAERO, France)

Efficient modelling of dynamic delamination growth using large and distorted elements

P. Daniel (btechc - Barcelona Technical Centert, Spain) , J. Främby (ANSYS Sweden, Sweden) , M. Fagerström (Chalmers University of Technology, Sweden) , P. Maimí (University of Girona, Spain)

Enhancing the crashworthiness in thin-walled filament-wound tubes

T. Scalici (Università degli Studi di Enna “Kore”, Italy) , D. Tumino (Università degli Studi di Enna “Kore”, Italy) , A. Alaimo (Università degli Studi di Enna “Kore”, Italy) , G. Catalanotti (Università degli Studi di Enna “Kore”, Italy)

Experimental Characterisation of Impact-Resistant Thermoplastic Composite Joints using Metallic 3D-Reinforcements

N. Breuer (TU Braunschweig - IFL, Germany) , S. Heimbs (TU Braunschweig - IFL, Germany) , M. Bartelt (TU Braunschweig - IFL, Germany)

Experimental Study on Crashworthiness of Cfrp Curved Structure

I. Papa (University of Naples Federico II, Naples, Ita, Italy) , M. Ricciardi (Institute for Polymers, Composites and Biomat, Italy) , V. Antonucci (Institute for Polymers, Composites and Biomat, Italy) , V. Lopresto (University of Naples Federico II, Naples, Ita, Italy)

Experimental Testing and Numerical Simulation of Filled Hole Tension and Compression Carbon Specimens Under Dynamic Loading

J. Guerrero (University of Girona, Spain) , I. Ruiz Cózar (University of Girona, Spain) , E. González (University of Girona, Spain) , J. Artero (University Carlos III of Madrid, Spain) , A. Cimadevilla (University Carlos III of Madrid, Spain) , E. De Blanpre (Dassault Aviation, France) , V. Jacques (Dassault Aviation, France)

In-Situ damage inception of composite under dynamic loadings

J. Rodríguez-Sereno (Universidad Carlos III de Madrid, Spain) , J. Pernas Sánchez (Universidad Carlos III de Madrid, Spain) , J. Artero-Guerrero (Universidad Carlos III de Madrid, Spain) , J. López-Puente (Universidad Carlos III de Madrid, Spain) , A. Vaz-Romero (Universidad Carlos III de Madrid, Spain) , F. Naya (Universidad Carlos III de Madrid, Spain) , D. Varas (Universidad Carlos III de Madrid, Spain) , A. Cohen (Department of Physics, NRCN, Israel) , B. Lukic (ESRF, France) , A. Rack (ESRF, France) , D. Levi-Hevroni (Department of Physics, NRCN, Israel)

Is it Damage, Plasticity, Rate Dependence or all of the Above? Characterising and Modelling the Non-Linear Behaviours of 3D-Fabric Reinforced Composites

C. Oddy (Chalmers University of Technology, Sweden) , F. Panteri (KTH Royal Institute of Technology, Sweden) , A. Kullerstedt (GKN Aerospace, Sweden) , S. Saseendran (GKN Aerospace, Sweden)

Life cycle assessment and mechanical properties investigation of FDMed PLA reiconfrced wuth dhort hemp fibers and basalt powders

E. Cozzolino (University of Naples Federico II, Italy) , A. Astarita (University of Naples Federico II, Italy) , V. Lopresto (University of Naples Federico II, Italy) , F. Napolitano (Institute for Polymers, Composites and Bioma, Italy) , P. Russo (Institute for Polymers, Composites and Bioma, Italy) , I. Papa (University of Naples Federico II, Italy)

Monitoring the response of composites under pure Mode II dynamic loading by means of IR Thermography

G. Pitarresi (Università degli Studi di Palermo, Italy) , R. Cappello (University of Bristol, United Kingdom) , T. Scalici (Università degli Studi di Enna “Kore”, Italy) , G. Catalanotti (Università degli Studi di Enna “Kore”, Italy)

Numerical Simulation of 3D Printed Continuous Fibre Reinforced Thermoplastic Composite Structures Subjected to Low-Velocity Impact

A. Fernández (Universitat de Girona, Spain) , D. Trias (Universitat de Girona, Spain) , N. Blanco (Universitat de Girona, Spain) , D. Rico (Universitat de Girona, Spain) , N. Gascons (Universitat de Girona, Spain)

On the high velocity impact of composite fragments against a Hopkinson Bar: experimental and numerial study

J. Rodríguez-Sereno (University Carlos III of Madrid, Spain) , J. Pernas-Sanchez (University Carlos III of Madrid, Spain) , J. Artero-Guerrero (University Carlos III of Madrid, Spain) , J. López-Puente (University Carlos III of Madrid, Spain)

Passive Safety Improvements in Aircrafts by Innovative Energy Absorbing Devices Designed for Additive Manufacturing

A. Garofano (Università della Campania “Luigi Vanvitelli", Italy) , A. Riccio (University of Campania “Luigi Vanvitelli”, Italy)

Polyurea-based coatings with Multiwall Carbon Nanotubes: A dynamic regime study

F. Dîrloman (Military Technical Academy "Ferdinand I", Romania) , G. Toader (Military Technical Academy "Ferdinand I", Romania) , A. Diacon (Military Technical Academy "Ferdinand I", Romania) , A. Rotariu (Military Technical Academy "Ferdinand I", Romania)

Prediction of impact damage and post-impact residual load-bearing capacity of NCF CFRP components

A. Cherniaev (University of Windsor, Canada) , M. Kazemian (University of Windsor, Canada)

Processing and low velocity impact behavior of innovative composites

V. Antonucci (CNR-IPCB, Italy) , M. RICCIARDI (CNR - IPCB, Italy) , I. Papa (University of Naples, Italy) , A. Langella (University of Naples, Italy) , V. Lopresto (University of Naples, Italy)

Temperature increase evaluation and analysis during high velocity impact tests on carbon/epoxy laminates

J. Berthe (ONERA, France) , G. Portemont (ONERA, France) , A. Peroche (ONERA, France)

Traditional and Innovative Fiber-Reinforced Polymer Composites: Characterization, Damage Inspection and Application

I. Papa (Unina, Italy) , V. LOPRESTO (Unina, Italy)

Unbiased Segment-to-Segment Frictional Contact Algorithms for Surfaces with various Discretisation Topologies

I. Sahu (University of Oxford, United Kingdom) , N. Petrinic (University of Oxford, United Kingdom)

Understanding the failure envelope of glass fiber at different strain rates: Strength and Toughness studies

P. Villarroel (Universidad Carlos III de Madrid, Spain) , A. Cimadevilla (Universidad Carlos III de Madrid, Spain) , J. Rodríguez-Sereno (Universidad Carlos III de Madrid, Spain) , J. Pernas-Sánchez (Universidad Carlos III de Madrid, Spain) , J. Artero-Guerrero (Universidad Carlos III de Madrid, Spain) , J. Lopez Puente (Universidad Carlos III de Madrid, Spain) , E. Lorenzo (Fidamc Foundation, Spain) , N. Colmenarejo (Airbus Spain, Spain) , E. Sola-Casado (Airbus Spain, Spain)

Using of the pre-notched composite plates in the delamination tests at low impact velocity

A. Rotariu (Military Technical Academy, Romania) , F. Bucur (Military Technical Academy, Romania) , F. Dirloman (Military Technical Academy, Romania) , A. Malciu (National University of Science and Technology, Romania) , A. Spoiala (Military Technical Academy, Romania)

DYCOMP - ECCCS – 3 2024

List of Confirmed presentations